Fascia is the board along your roofline that eavestrough actually hangs from. Soffit is the panel underneath the overhang, usually vented to let attic air escape. When either one fails, it's rarely just cosmetic — it's the reason your eavestrough is sagging, or the reason ice is damming along your roof edge.

When you need fascia or soffit work

  • Fascia board is soft, rotting, or visibly stained below the eavestrough
  • Hangers are pulling out because the fascia underneath won't hold a fastener anymore
  • Soffit panels are missing, damaged, or blocking attic airflow
  • You're replacing your eavestrough and want the trim brought up to match
  • Squirrels, wasps, or birds have gotten into a gap

How our local pros handle it

  1. Inspect. Fascia and soffit checked for rot, water damage, and ventilation gaps along the whole run.
  2. Repair or replace. Damaged sections cut out and replaced with matching material, and soffit vents cleared or added where airflow is blocked.
  3. Reinstall eavestrough. Once the trim is solid, eavestrough is re-hung or installed fresh on top of it.
Blocked soffit vents are one of the most common, least-noticed contributors to ice damming. Without airflow, attic heat has nowhere to go but up through the roof, melting snow that refreezes at the eaves.

Get a free, no-obligation quote

Tell us about your home and we'll connect you with a licensed local pro — most homeowners hear back within 24 hours.

Get My Free Quote

Common questions

Not necessarily — if the eavestrough itself is in good shape, it can usually be taken down, the fascia repaired, and the same eavestrough re-hung.

Fascia is the vertical board along the roof edge that eavestrough attaches to. Soffit is the panel underneath the roof overhang, usually vented to let attic air escape.

Rotting fascia tends to get worse, and hangers pulling loose can drop a section of eavestrough entirely. It's worth addressing before that happens rather than waiting for a re-roof.